Thursday 25 November 2010

Berghaus Pro Trek Shell Jacket



I've been looking for a new shell jacket for quite some time but found it difficult to get something that met the design criteria that I had in mind. To be honest the criteria wasn't anything unusual or at least that's what I thought.

I wanted a decent wired hood that wasn't cut away at the sides, something like my old Phoenix Gore-Tex jacket or the Paramo VAL, I wanted a standard zip and double external stormflap rather than a waterproof zip, I also wanted at least one map sized pocket accessible behind the stormflap or at least accessible without needing to open the main zip, I wanted a waist drawcord and finally I wanted self fabric cuff tabs rather than rubber tabs. I didn't really care whether it was eVent or Gore-Tex as I didn't notice much difference in breathability with my eVent Montane Venture over my Gore-Tex jacket. The Venture isn't a bad jacket but I really disliked the hood to the extent that I've only worn it about half a dozen times.

I've had good results with Mountain Equipment clothing and quite liked the look of the Morpheus although I was doubful about whether I'd like the hood in spite of it being highly rated. I was browsing the Field & Trek website and noticed that the Morpheus was on sale so decided to order one, being unsure of the size I checked Mountain Equipments website and decided on small.

I really liked the Morpheus, the design was clean and the fit was good, it ticked most of the boxes having an external map pocket, a waist drawcord, standard zip and external stormflap and self fabric cuff tabs but unfortunately the hood let it down. I felt that the hood was too small, too cut away at the sides and the collar didn't go up quite high enough. I wondered if a medium would be better but couldn't get a Medium Morpheus in the sale so decided to try the Mountain Equipment Ogre which was reduced. I ordered a medium but it felt too big and the hood still didn't feel right so it went back, it's possible that a Small Ogre might have worked as I think the hood is slightly different to the Morpheus but at £190 I needed to be 100% satisfied so decided not to take a chance.

I looked at as many different brands as I could think of and couldn't find anything so asked on Outdoors Magic for suggestions, eventually someone suggested the Berghaus Pro Trek and for want of any better suggestions I ordered one from Outdoor Action in size medium, price £140.

I'd tried a Berghaus jacket earlier in the year in one of those shops that sells end of line clothing, I think the jacket was the Dunedin and I'd liked the general fit and the style of the hood so I was reasonably confidant that the Pro Trek would be the one. The jacket duly arrived and after trying it with a variety of midlayers I decided to keep it. It doesn't tick all the boxes but I've had to compromise as the hood is right and that's the major thing for me.


Not a Slim Fit Jacket but I can easily get a down jacket underneath.

The Pro Trek is made using 3 layer Gore-Tex Pro Shell and is a bit heavier than my Montane Venture at 600g, it has a standard front zip with an external double stormflap, the flap closes with small velcro strips set at intervals rather than a full length velcro strip on the Morpheus, I think I prefer the small strips as velcro is a bit of a pain generally as it tends to catch up on everything else, to be honest I can't see why they don't just use studs to secure the stormflap. It has 2 handwarmer type pockets which use waterproof type zips but also have a little stormflap, there are 2 chest pockets capable of holding a map, like the other pockets they have waterproof zips/stormflaps. Finally there's a zipped mesh inside pocket.


Mesh Inner Pocket

The hood drawcord is elastic and the ends of the cord are kept out of the way behind the stormflap but the cordlocks are much too small, it's difficult to release them with bare hands and virtually impossible with gloves.


Hood Cordlocks


Hood Drawcords behind Stormflap


Micro Fleece inner collar, studs help keep the hood rolled and secured

I intend to replace them with side release cordlocks from Shelby in Finland which are similar to the ones on a Montane Flux .

The jacket also features pit-zips, how much advantage they'll be I've yet to find out, given a choice I'd probably do without as it's one more thing to go wrong, in any case the zips are the waterproof type and again have a small stormflap.


Pit Zips


Rubber Cuff Tabs, Stiff, Bulky and Prone to Snagging


Old Phoenix Shell Jacket with Self Fabric Cuff Tabs, Low Profile and Perfectly Functional

There isn't a waist drawcord unfortunately but that's one of the compromises I decided to accept to get the type of hood I wanted. The other compromise is the cuff tabs, they're the rubber type and to be honest I just don't see what advantage they offer over self fabric tabs, they're stiff, don't want to lie flat and tend to catch on gloves, pockets and so on, I'm seriously considering cutting them off and sewing on a plain velcro tab. I'd class the cut as full which is exactly what I wanted as it needs to work with a variety of midlayers, I didn't want a slim fit as I already have a close fitting waterproof for using outside of winter.


Ample Protection on the Hill, Less Stylish on the High Street


Volume Adjuster, Studs Secure Rolled Hood

The Hood, well the hood was always going to be the deal breaker, thankfully the hood on the Pro Trek is a full on mountain hood that should protect from wind driven rain/sleet/hail, the drawcord goes all the way around so it actually tightens around my face rather than simply pulling the hood down (or the shoulders up) like my Montane Venture. The peak/visor has a decent wire stiffener and has a volume reducer that is pretty similar to the Mountain Equipment design, and when zipped up the collar comes right up to nose level comfortably.


Hood Rolled and Secured


Micro Fleece inner collar

There's only one aspect of hood that I don't like or at least don't see the benefit of. The hood can be rolled away and secured with plastic press studs but to be honest the wire stiffener makes it a rather stiff and uncomfortable collar, it's much more comfortable to just have the hood hanging loose and in any case you'd need to remove the jacket to roll and secure the hood. To be honest I think it's a case of having an extra feature for it's own sake and like the rubber cuff tabs it adds little if anything to a jacket that would function just the same without it. Ironically the studs used to secure the hood could have been used to secure the stormflap, that in my opinion would have improved the jacket.


Hood Worn Rolled, It's Quite Stiff and Uncomfortable due to the Wire Stiffener


Hood Worn Loose with the Peak/Visor turned down, I find it more comfortable this way

That said I like the jacket and while it's yet to be tried in the conditions it was bought for it should be tested quite soon given the weather reports.

11 comments:

  1. One thing Berghaus have always done well is a serious jacket with a serious hood. Nice to see them back in the game.

    ReplyDelete
  2. True Maz, unfortunately I don't see the Pro Trek in the current range and few of the serious jackets have a standard zip/stormflap.

    ReplyDelete
  3. My Berghaus Paclite smock has the best hood of any hardshell jacket I've owned. Shame Paclite is not that breathable.

    ReplyDelete
  4. I like Pro Shell - my Haglöfs LIM Ozone (love that jacket) is Pro Shell and was one of the first jackets to be made in it, but it has stood up well to all sorts. I have not seen any real difference between Pro Shell and eVent as I often wear the two together (I use Montane Venture pants as full-spectrum walking pants rather over trousers if there is any possibility of rain as they breathe so well).

    ReplyDelete
  5. Pro Shell seems to b e a superb innovation from Gore. Nice jacket. I think Berghaus have an image that is stuck in the early nineties. They make good kit. Some is awful but not all. There are some real gems in their range. For me the hood on that jacket is the standout thing.

    ReplyDelete
  6. I'm glad to hear that Pro Shell works.

    The interesting thing about the comments so far is the agreement regarding the hood, to be honest I felt as if I was going out on a limb criticizing more recent low profile designs but decided to go ahead anyway. While the Cut-Away Flat Cap style work acceptably well in moderate conditions I feel that if you really need a bombproof laminate jacket then you need a hood to match, one which puts protection ahead of looks.

    Berghaus have suffered from an image problem in the last few years but I'm afraid I don't have much sympathy for them as they choose to go down the fashion/high street route. They've always had good servicable gear but it tended to get lost amidst the 'High Street Wear', some of the new stuff looks good managing to combine more recent design and bang up to date fabrics without compromising too much on ultimate performance. I still feel that there's room in everyones range for a tough, no frills yet fully featured jacket.

    ReplyDelete
  7. I'm waiting for the Asgard smock. Drool!

    ReplyDelete
  8. I liked the look of the Asgard when I 1st saw it but looking at the details I'm less enthusiastic. As a full on winter shell I prefer the style of the Pro Trek even if it is 2x the weight.

    ReplyDelete
  9. Richard,
    The one thing that you need to watch out for with Berghaus jackets is the tensioner on the rear of the hood.
    The cord is not protected from the elements. During heavy rain this cord will gradually soak up the water and it will work it’s way inside.
    I recommend that you either find a way of covering/protecting the cord or make a silicon/white spirit solution and soak the cord for a few inches. Once it’s dry, this will prevent the water from wicking inside.

    ReplyDelete
  10. Am glad you like the protrek as am the one who gave it as an option. I don't really see the point of the collar either, but i do find it a good jacket. Hope it works out for you!
    @ The Odyssee: Good tip for the volume cord, will give it a go cheers!

    ReplyDelete
  11. Hi, thanks for suggesting it, I do like it. It's a nice roomy fit, easy to layer underneath but doesn't feel uncomfortably either. I'm sure it'll work well.

    Thanks for the comment too. :-)

    ReplyDelete